Orvis Pro Depth Charge 3D Fly Line

The Orvis PRO Depth Charge 3D Fly Line is a triple density sinking fly line designed with three different levels of sink to eliminate the hinge effect in the line, for better strike detection and line feel. This design allows the Orvis PRO Depth Charge 3D Fly Line to retain a tight connection from fly to angler as it sinks into the water column, reducing unwanted slack. Superb for swinging flies through fast currents or working streamers in deep stillwaters.

Features

The front section is a 30’/9.15 meter full sink tip (6 inches/15 cm per second average sink rate based on grain weight). The mid-section is a 20’/6.10 meter type 3 (3 inches/7.5 cm per second sink rate). The running line is an intermediate with a 1.5 inches/3.8 cm per second sink rate.

Available in

• 150 grains/9.7 grams (#5/6 mist green/dark green/dark grey
• 200 grains/12.9 grams (#6/7 yellow/dark green/dark grey)
• 250 grains/ 16.2 grams #(7/8 orange/dark green/dark grey)
• 300 grains/19.4 grams (#8/9 surf/dark green/dark grey)
• 350 grains/22.7 grams #(9/10 green/dark green/dark grey)
• 450 grains/29.2 grams (#11/12 white/dark green/dark grey)
• 550 grains/35.6 grams (#12+ red/dark green/dark grey)

The AST Plus treatment of the Orvis PRO Depth Charge 3D Fly Line provides continuous slickness that incorporates completely, continuously migrates out, works longer, and is eight times slicker than any other slickness additive available for better shooting, improved floatation, and performance. Easily sheds dirt and oils allowing line to perform better longer
Orvis Line ID quickly identifies the line with the taper, weight and functionality.

Enhanced welded loop makes leader attachment quick and easy while holding up to repeated use. Helps to transfer energy more efficiently to the leader allowing better turnover.

All PRO lines are 90′ in length and incorporate three colour sections at 8’/2.44 meter (stealth tip), 30’/9.15 meter (from the tip), and rear taper and running line.